
White Oak Hardwood Flooring
White oak runs tan to brown, cooler and tighter-grained than red oak.
White Oak Flooring, Grown in Western North Carolina and Milled in Marion
It holds a clear or light finish without the pink undertone red oak can show. Ours grows in Western North Carolina, is sawn in Burnsville, and is milled into solid, unfinished flooring in Marion.
- Construction
- Solid
- One piece of wood, top to bottom.
- Finish
- Unfinished
- Sanded and finished on site.
- Widths
- 2¼″ to 5″
- Four widths. See the table below.
- Grades
- 3
- Select, 1 Common, 2 Common
White Oak Availability & Grades
Grown in Western North Carolina, sawn in Burnsville, milled in Marion. The grade decides how much of the tree's character shows in the floor. We use the NWFA grade names.
Availability by Grade and Width
| Species and grade | 21/4″ | 31/4″ | 4″ | 5″ |
|---|---|---|---|---|
| White Oak, Select | In stock | In stock | In stock | In stock |
| White Oak, 1 Common | In stock | In stock | Out of stock | In stock |
| White Oak, 2 Common | In stock | Out of stock | In stock | In stock |
In stock Out of stockCall 828-682-6215 for current stock.
White oak availability by grade and width. Unfinished solid hardwood.
- White Oak, Select: 21/4″, 31/4″, 4″, 5″
- White Oak, 1 Common: 21/4″, 31/4″, 4″ (out of stock), 5″
- White Oak, 2 Common: 21/4″, 31/4″ (out of stock), 4″, 5″

The Grades

Select
Natural color variation between heartwood and sapwood, with limited character: about one small tight knot every 3 feet, pin worm holes and slightly open checks. A clean, fairly even floor.

1 Common
Prominent color variation and varying character. Sound open characters like checks and knot holes are allowed if they fill readily. More life in the floor, less uniformity.

2 Common
Sound natural variations of the forest and some manufacturing marks. NWFA describes it as suitable where character marks and contrasting appearance are wanted.
What White Oak Looks Like, and How Hard It Is
White oak runs tan to brown, cooler than red oak, with tighter grain and a quieter figure. Under a clear finish it reads honey to light brown, and it holds natural and light finishes without the pink cast red oak can show.
The USDA Forest Products Laboratory Wood Handbook lists white oak (Quercus alba) at 1,360 lbf Janka side hardness at 12 percent moisture content,† a little harder than Northern red oak. It sands and refinishes well, so a floor laid now can be renewed for decades.
Where It Fits
Natural and light-finished floors, open plans where the grain should stay calm, 4" and 5" plank where more of each board shows, and 2-1/4" strip to match older white oak floors. For 1-1/2" strip, see Victory Flooring.
Finishing Unfinished White Oak
White oak is the species to choose for natural, light and clear finishes. It also takes darker stains evenly. Because it arrives unfinished, the color is decided on site, in the room's own light, after sanding. Ask your installer for a sample board finished in your chosen stain before the whole floor is done.
Forest Products Laboratory. 2010. Wood handbook: Wood as an engineering material. General Technical Report FPL-GTR-190, Table 5-3. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. https://www.fpl.fs.usda.gov/documnts/fplgtr/fpl_gtr190.pdf
Let's Talk Hardwood
Solid hardwood, checked by hand before it ships. We'll help you choose the right floor for your project.








