Red Oak Hardwood Flooring

Red oak is the floor most American houses grew up on.

Red Oak Flooring, Grown in Western North Carolina and Milled in Marion

Ours is cut from red oak grown in Western North Carolina, sawn into lumber in Burnsville and milled into solid, unfinished flooring in Marion.

Construction
Solid
One piece of wood, top to bottom.
Finish
Unfinished
Sanded and finished on site.
Widths
2¼″ to 5″
Four widths. See the table below.
Grades
3
Select, 1 Common, 2 Common

Red Oak Availability & Grades

Grown in Western North Carolina, sawn in Burnsville, milled in Marion. The grade decides how much of the tree's character shows in the floor. We use the NWFA grade names.

Availability by Grade and Width

Red oak availability by grade and width. Unfinished solid hardwood.
Species and grade21/4″31/4″4″5″
Red Oak, SelectOut of stockIn stockIn stockIn stock
Red Oak, 1 CommonIn stockIn stockIn stockIn stock
Red Oak, 2 CommonIn stockIn stockIn stockOut of stock

In stock Out of stockCall 828-682-6215 for current stock.

Red oak availability by grade and width. Unfinished solid hardwood.

  • Red Oak, Select: 21/4″ (out of stock), 31/4″, 4″, 5″
  • Red Oak, 1 Common: 21/4″, 31/4″, 4″, 5″
  • Red Oak, 2 Common: 21/4″, 31/4″, 4″, 5″ (out of stock)

The Grades

  • Select

    Natural color variation between heartwood and sapwood, with limited character: about one small tight knot every 3 feet, pin worm holes and slightly open checks. A clean, fairly even floor.

  • 1 Common

    Prominent color variation and varying character. Sound open characters like checks and knot holes are allowed if they fill readily. More life in the floor, less uniformity.

  • 2 Common

    Sound natural variations of the forest and some manufacturing marks. NWFA describes it as suitable where character marks and contrasting appearance are wanted.

How Grading Works

What Red Oak Looks Like, and How Hard It Is

Red oak runs pinkish to russet, with an open, pronounced grain you can feel under your hand before it's finished. The pores are open, which is why it takes stain so readily and so evenly. Red oak has been the default American floor for generations, so it's often the species already down in an older house.

The USDA Forest Products Laboratory Wood Handbook lists Northern red oak (Quercus rubra) at 1,290 lbf Janka side hardness at 12 percent moisture content.† It sands and refinishes many times over the life of the house.

Where It Fits

Whole-house floors, remodels where it has to match what's already down, stained floors, where mid and dark stains even out its pink, and 2-1/4" strip in older homes. For 1-1/2" strip, see Victory Flooring.

Finishing Unfinished Red Oak

Red oak shows its pink undertone most under clear finishes and lighter stains. Mid and dark stains even it out. Because it arrives unfinished, the color is decided on site, in the room's own light, after sanding. Ask your installer for a sample board finished in your chosen stain before the whole floor is done.

Let's Talk Hardwood

Solid hardwood, checked by hand before it ships. We'll help you choose the right floor for your project.