About Mt. Mitchell Hardwood Flooring

A family business from the mountains of Western North Carolina that saws its own logs and makes them into floors.

We Started With Lumber. We Kept Going Until It Was a Floor.

We're a wood products manufacturer from the mountains of Western North Carolina. We saw our own logs in Burnsville, then dry the lumber and make it into unfinished solid hardwood flooring in Marion. Several generations of our family have made a living from these forests, with a team of skilled people from this area.

Chain
1
Forest to floor: grown in Western North Carolina, sawn in Burnsville, milled in Marion.
Mt. Mitchell
6,684 ft
The highest point east of the Mississippi is in our back yard.
Species
3
Red oak, white oak and hickory, all unfinished solid hardwood.
Widths
1½″ to 5″
From our Victory narrow strip to 5" plank.

Our Story

How We Got Here

Our roots are in the lumber business. For a long time our work ended when the lumber was sawn. Over the years we took on more of the process, drying, milling and grading, until the same people who handle the logs were also making the finished floor.

Our Marion plant is that last step.

Forest to Floor

Why We Keep the Wood the Whole Way

Our flooring starts with sustainable forest management practices and professional timber harvesting. The logs are sawn into green lumber at a high production sawmill in Burnsville. The lumber is dried in Marion, where our flooring plant is, and that's where it's milled, graded and bundled.

Holding onto the wood that long is how we control what ends up in a bundle. We decide how a log is opened and how the lumber is cut, so the boards that reach the flooring line are already set up for good lengths and clean grades.

In Our Words

Knowing that we are able to maintain custody of the wood fiber from the forest to the floor is important not only from a quality standpoint, but honestly, it just gives us a lot of pride.

Mt. Mitchell Hardwood Flooring

Where It Comes From

From the Mill to Your Floor

Our trees grow in the mountains of Western North Carolina. From the log yard to the finished bundle, the wood stays with us.

The Sawmill Burnsville, NC

Logs from Western North Carolina are sawn into green lumber at our sawmill. Mt. Mitchell, at 6,684 feet the highest point east of the Mississippi River, is in our back yard.

The Flooring Plant Marion, NC

The lumber is dried, milled into flooring, graded and bundled here, by people who have spent decades in the trade.

Address
4 Old West Henderson St, Marion, NC 28752
Hours
Monday to Thursday, 8 a.m. to 4 p.m.

The Last Stop Your Dealer

We sell through flooring dealers. Your installer lays the floor, sands it and finishes it on site. We don't install floors.

Find a supplier near you

Small on Purpose

More Hands on Every Board

The person who sells you flooring is hands on in making it. That's why we scrutinize each piece.

We've made a living out of providing a product with the grades and specifications just as they're stated. How we grade

What We Don't Do

We don't run a showroom. Everything we make ships unfinished, to be sanded and finished on site by your installer. We sell mainly through flooring dealers, and we're glad to help a homeowner or builder find one who carries our flooring. Find a supplier

Sustainability

Wood Grows Back

People sometimes assume a solid hardwood floor uses up a forest. It doesn't. According to USDA figures reported by the American Hardwood Export Council, the volume of hardwood growing stock in U.S. forests rose from 5.2 billion to 12.0 billion cubic meters between 1953 and 2017.

Hardwood is a renewable resource, and a solid floor made from it can be sanded and refinished many times over its life.

Let's Talk Hardwood

Solid hardwood, checked by hand before it ships. We'll help you choose the right floor for your project.